Functional Electric Stand
د.إ.3,000.00
د.إ.0.00( / )
Height: min 835 - max 1,960mmSwivel: 160 DegreesVESA: 600x400mmProduct Dimensions 83.82 x 71.12 x 190.5 cm; 18.6 Kilograms
Height: min 835 - max 1,960mm
Swivel: 160 Degrees
VESA: 600x400mm
Product Dimensions 83.82 x 71.12 x 190.5 cm; 18.6 Kilograms
Light Therapy FAQs
Red and near-infrared light therapy are similar except for two differences: Red Light is visible, and Near-Infrared Light is invisible. Near-infrared light penetrates the body deeper than red light.
It depends on the condition you are dealing with and the device you are using. For most situations, daily use for at least two weeks is recommended, followed by a maintenance regimen of one or two weeks.
Yes. Just because you see results, it doesn't mean your skin cells are done doing their job. It's just that the results of their efforts are starting to become something you can see or feel. Track treatments until you reach your Target Level of Results. Then you can begin a weekly maintenance program.
The typical human eye responds to wavelengths from 400nm to 700nm. While you will see a powerful red spectrum, the infrared light is almost invisible to the human eye. We recommend, however, not directly looking into the device while using it.
The surface may get a little warm. However, there is a built-in cooling fan that is going to keep it from getting very warm. With that being said, Our devices are very high power and can cover a large surface area, so you shouldn't need to be very close to the device to get effective treatment. We recommend about 6-12 inches away from the device in general.
No, the light is non-ionizing. The light will not tan you.
It is not rechargeable, it must be plugged in to a power source. The panel comes with a power cord.
Shine it on your neck from about 6-12 inches away for 5-7 minutes or so, daily. If you do a google search for red light therapy and thyroid function, there are many encouraging studies and publications.
There isn't a specific time best for red light therapy. Since the only two wavelengths of light being emitted are red at 660 nanometers and near-infrared at 850 nanometers, there is zero light from the blue spectrum, which is the light that would of course, signal to your body that it's time to suppress melatonin production and be awake. So, you should be able to do it at any time of the day without any issues. Of course, if you want to play it safe, you could just do it in the morning, but it really should not affect your sleep.
Yes. The key is red at 660 nanometers and near-infrared at 850 nanometers (or very close to those wavelengths), delivered at high power output (at least 100mW/cm2 at the surface).
The irradiance results are based on the Red (660nm) and Near Infrared (850nm) switches being turned on. If only using red, or if only using near-infrared, the irradiance would be lower. We typically recommend customers use both red and near-infrared at the same time. The near-infrared wavelengths can penetrate a little bit deeper than the red wavelengths, but other than that, the benefits are for the most part, the same!
Door/wall-mounted, hang and stand alone. Turn the power on and switch it “On” and then the light will work.
If the product you received isn't functional or damaged, you can return it to us within 30 days with the original proof of purchase, and we will send you a new product. Please make sure, while returning, the product isn't damaged in transit and gets to our location in good condition.